How to Replace a Saab 9-3 Key
The Saab 9-3 is a fantastic car that is full of driver appeal. It has a powerful engine and excellent visibility. It has a very high safety rating.
It is vital to have two keys that are compatible for your vehicle. It can be costly to replace a key if you lose it.
How to Replace the Ignition Key on a Saab 9-3
If your car's keys won't turn on you must replace it. This guide will teach you how to replace the ignition key on the Saab 9-3. You will have to replace the key, buy an updated reprogrammable phone, and purchase a new case for your key-fob.
As opposed to earlier models, modern Saab automobiles use transponders in the key-fob instead of a physical key that can be used to unlock and start the vehicle. The reprogrammable batteries in the key-fob eventually expire, and they cannot hold any charge. This is especially true if you keep using the same key in the same lock.
A professional locksmith can change the battery fairly easily. You can also do it yourself if you have the proper tools and a bit of patience. The first step is to separate the key-fob. Insert an open-ended head into the slot that is in the middle of your case. The plastic is thin, and is easily damaged.
After the case is opened, you can create the new key by combining the lower part of old key with the transponder and banana. This will ensure that the new key is connected to the CIM properly, which could make a big difference when replacing the original key for your Saab 9-3.
How to replace the ignition Key in a Saab 900
If you do not have two keys, you'll need to remove the steering wheel and dashboard to gain access to the ignition. Start by disconnecting the negative battery cable. After the battery has been disconnected, you are able to remove the dashboard and trim pieces around the steering wheel. Once the dash is removed, you can place an screwdriver into the opening behind the ignition switch.
The ignition cylinder has a key lock that can stop the vehicle from starting if the key isn't there. If saab fob key replacement of your 900 isn't working, look at the key to determine if it's in the lock or in the ignition barrel. It's also recommended to rotate your keys regularly and clean them regularly so that they don't get bent.
Saab cars are different from other vehicles in that they don't use traditional metal keys. Instead, the car is able to recognize the key fob's electric signals through a special chip in it.
If you lose just one functioning key fob, your dealer will charge a premium to replace your computer module (also called the CIM). We can reprogram the EEPROM of your current computer to make it accept new keys, without the need to replace it. You will save over 50% off the price of the dealer! This is the SAAB KEY PROGRAM. Find out more about it here!
How to Replace the Ignition Key in a Saab9-5
The metal part of classic Saab keys is simple to duplicate and doesn't present a major threat to theft of vehicles. The electronic part of the key-fob comes with an embedded chip that can identify the car when the key is put in the ignition switch.
Saab has relied on the technology of this anti-theft system for more than 10 years. It's not as efficient as a physical lock for your door but it does make stealing your car a lot harder. Every Saab owner needs to keep an extra Saab key in their vehicle.
The majority of new Saabs come with two keys, but they can be purchased from an agent using a handheld device referred to as a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is the NG 9-3 vehicles which are more modern and more advanced features that require the use of a key-fob.
If you lose all keys and the dealer replaces your CIM or TWICE modules, and charge you the cost of replacement. We can reprogram your computer's EEPROM to accept new keys without replacing expensive modules.
How to Replace the Ignition Key in the Saab XC90
If your SAAB 9-3 key fob is having issues turning the barrel of the lock it's possible that it's time to replace it. The procedure is quite simple and you don't even need to go to a dealership. You can do it at home using just a few simple tools.
First, you'll need to make the new keys. Before you begin, ensure that the anti-theft system has been disabled by placing blocks on the rear wheels and releasing the handbrake. Insert the key in the ignition, and then turn it to the "on" position. This will activate the accessories but will not start the engine. Repeat this process 5 times, then turn off the key in the "on" position.
You'll then have to buy an additional case for your key fob. They can be found at any auto parts shop, and they're generally quite affordable. You can buy them with or without electronics, depending on the model.
To open up the case, insert an flathead screwdriver into the slot located in the middle and gently work it. When you've split the case, you'll be able to access all the internal electronics. To take the electronics out, use a small flathead screwdriver and try prying them out with a gentle force.